Easylog USB Control Software For Data Loggers

The core of Lascar's data logging solution is the free software supplied with each data logger. Using a wizard format to guide the user through setup of the data logger and subsequent download of collected data, the software puts the 'easy' into EasyLog.

EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs under Windows 2000, XP (

Home and Professional Editions) & Vista (32-bit). The software is used to set-up the data logger as well as download, graph and export data to Excel. The software allows the following parameters to be configured:

The latest version of the control software may be obtained free of charge contact hcs@hcs77.com

How To Setup An EL-USB Data Logger

Downloading Data Demonstration

Your Thermocouple

The probe supplied with your EL-USB-TC-LCD is a K-type thermocouple designed to measure temperatures from 0 to 400ºC (32 to 752ºF). The EL-USB-TC-LCD is designed to work with J, K and T-type thermocouples fi tted with a standard mini thermocouple connector; this makes your data logger compatible with a wide range of available thermocouples. Your application will determine which probe is most suitable based on temperature range, accuracy, form and price.

LED Flashing Modes

EL-USB-TC-LCD features two LEDs that indicate the logging, battery and alarm status:

Hold is enabled by default, which forces the logger to continue flashing the red LED after an alarm, even when the temperature has returned to normal. This feature ensures that the user is notifi ed that an alarm level has been exceeded, without the need to download the data from the logger

Hold can be turned off via the control software. The red LED will then only fl ash whilst the logger is in an alarm condition. When the temperature returns to normal, the green LED will flash.