Voltage Transducers

Multifunction Digital Transducer
Single Phase CRD5110

Multifunction Digital Transducer Single Phase CRD5110

Loop-Powered, AC, Voltage Transmitters, CR4640 The all new CR Magnetics Data Stream Series of Electrical Properties Transducers are the most advanced electrical sensing products available in the industry. Voltage, Current, Power, Power Factor, Energy and Frequency can all be monitored in a single package. The sensed information is then provided to the system via an RS485 serial bus.

Constructed in a DIN Rail mount package, this series is available in multifunction (CRD5100) and voltage and current only (CRD4500, CRD4100) devices. A simple set of ASCII based commands controls all functions of the transducer. A low cost RS485 to RS232 converter can help the user control up to 256 devices with a single RS232 connection.


Heart Beat and Communication Indicators Pre-Calibrated with Non-Volatile Memory RS485 Output Current Input up to 25 AAC Voltage Input up to 300 VAC Single or Three Phase DIN Rail or Surface Mount	Basic Accuracy: 0.5% Frequency 45 to 65 Hz Continuous Overcurrent: 10 times Full Scale Continuous Overvoltage: 2 times Full Scale Isolation Voltage: 2500 VDC Supply Voltage: 24VDC +/- 5% Supply Power: Less than 250 mWatts Output ESD Protection: +/- 15KV Output Resolution: 16 BIT Operating Temperature: 0 to 50 C	Sub-Metering Energy Measurement Motor Loads Remote Monitoring Automatic Control Systems Load Shedding