1/16 DIN Fuzzy Logic Temperature Controllers From FuzyPro

1/16 DIN, Fuzzy Logic, Temperature Controllers, FuzyProThe FuzyPro 1/16 DIN fuzzy logic temperature controllers can easily be configured to provide precise control. The advanced Smarter Logic "Fuzzy" allows processes to be controlled better than ever before, with virtually no initial overshoot or temperature variations.

As the control detects a process disturbance the fuzzy logic continuous decision making function quickly returns the process value to the setpoint. A single ramp/soak function prevents rapid temperature changes that could damage the product being heated. An optional dwell timer enables an event to be timed on or off when preset temperature is attained. In addition self-diagnostic capabilities, sensor linearization and cold junction compensation are all performed by the powerful, single chip microprocessor.

 

1/16 DIN Fuzzy Logic Temperature Controllers Features:

  • 48mm by 48mm Smarter Logic for superior control

  • Automatic tuning of PID parameters

  • Splash & chemical resistant sealed mylar front panel

  • External lockout PID heating and PID cooling

  • A11 control parameters front panel adjustable

  • Auto/manual operation, F or C display, 3 year warranty

  • Selectable input, optional alarm or on/off delay timer


1/16 DIN Fuzzy Logic Temperature Controllers
Specifications:

INPUT

Thermocouple

Type J,K,T,E,B,R,S,N (selectable)

RTD

PT100 ohm (DIN or JIS)

Linear

10-60mV configurable input other voltage or current

Display

In temperature or engineering units.


OUTPUTS

Relay

SPDT relay rated 3A,240v maximum resistive load

Pulsed Voltage

32VDC, 20mA maximum

Current

4-20mA, 0-20mA maximum load 500ohms

Voltage

0-10V load 500k ohms

Alarm

14 selectable alarm modes; Process deviation and band, SPST relay rated 2A,240V maximum resistive load with adjustable hysteresis.


CONTROL FEATURES

Temperature Range

Selectable

Set Point

Full range adjustable

Alarm Set Point

Full range selectable

Control Modes

Selectable control modes:
On/Off, Proportional(P)
Proportional/Integral(P/I)
Proportional with manual reset
Proportional Derivative(PD)
Proportional/Integral/Derivative(PID)

Proportional Band

0-100% of span

Manual Reset

0 to (P x span/100)

Integral (Reset)

0 to (P x span/100)

Derivative (Rate)

0-1000 seconds

Anti-Reset Wind-up

0-1000 seconds

On/Off

Adjustable hysteresis from 0-25.5% of span

Manual Mode

Configurable as open loop control should sensor no longer function.

Cycle Time

0-120 seconds

Sensor Break Protection

Configurable status of control and alarms

Control Action

Selectable-Direct action for cooling Reverse action for heating.


INDICATION

Display

4 digit red 1/2" LED Process value Display; Green 3/8" LED Set Value display Selectable decimal placement for normal or high resolution display. Example: 0000;000.0; 00.00 or 0.000

Status Indicator

2 LED's Output: Green Alarm: Red

Sample Rate

333 milliseconds F/C: Selectable

Power Supply

80-26OVAC 50/60Hz Consumption: Less than 5VA

Data Retention

10 years (EEPROM)

Control Stability

0.15%(typical) of full scale

Accuracy

±0.25% of range: ±-1ºC or 0.5% in high resolution

Cold Junction Compensation

0.1%/ambient

Ext Resistance

100 ohms, maximum

Normal Mode Rejection

60dB Common Mode Rejection:120dB

Operating Temperature

14ºF - 122ºF (-10ºc - 50ºC) Humidity: 0-90% RH

Vibration

10-55Hz, amplitude 1 mm Shock: 200m.s(20g)



   
 


Heaters Controls And Sensors Products