1/8 DIN Fuzzy Logic Digital Indicator Controller FuzyPro Model 8010

1/8 DIN, Digital Indicator Controller, Fuzzy Logic, FuzyPro, Model 8010The FuzyPro 1/8 DIN Fuzzy Logic Digital Indicator Controller Model 8010 available with red or green displays. One latchable relay is fitted as standard, plug-in modules allow two more alarm relays, PV retransmission or transmitter PSU.

  • Four-digit LED display

  • Up to 3 alarms

  • transmitter PSU option

  • Min/max value hold

  • Engineering units

  • PC configuration

  • PV retransmit option

  • RS485 comms option


1/8 DIN Fuzzy Logic Digital Indicator Controller Features:

Output Configuration

Up to 3 total, max 3 for Alarms, max 1 for retransmit of PV, max 1 transmitter power supply

Alarm 1, 2 & 3 Types

Process high, process low, direct acting, process high, process low reverse and logical OR

Viewable Values

Process variable, maximum value, minimum value and elapsed time since reset


ºC/ºF LED, Labels for 27 other common units, mounted behind clear window

Human Interface

3 button operation, 4 digit 13 mm high red or green display, plus setup, alarm, max & min indicators

PC Configuration

Off-line configuration from serial port to dedicated config socket (comms option not required)


1/8 DIN Fuzzy Logic Digital Indicator Controller Input:


J, K, R, S, T, B, L, & N


3 wire PT100 50 per lead maximum (balanced)

DC Linear

0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scalable -1999 to 9999, dec point available


>100M for Thermocouple and mV ranges, 47K for V ranges and 4.7 for mA ranges


+/- 0.25% of input scan +/- 1 LSD (T/C CJC better than 0.7ºC)


4 per second, 14 bit resolution approximately

Sensor Break Detection

<2 secs (except zero based DC ranges), *high alarms activate (*low for RTD, mA or V)


1/8 DIN Fuzzy Logic Digital Indicator Controller Outputs & Options:

Alarm 1 Relay

Contact SPDT 2Amp resistive at 240V AC, >500,000 operations, latching or non-latching. Fitted as standard

Alarm 2 & 3 Relays

Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations (optional)

Retransmit Output

0-20/4-20mA to 500 max, 0-10/0-5V into 500 min. Accuracy typically +/- 0.25%

Transmitter Power Supply

20-28V DC (24V nominal), max load 910 (22mA at 20V)

Remote Reset

External reset of latching alarm 1 relay. Volt free or TTL input (Reset = open to close or "0" to "1" transition. 0 = -0.6 to 0.8V, 1 = 2 to 24V)


2 wire RS485, 1200 to 9600 baud. Modbus or West ASCII (selectable)


1/8 DIN Fuzzy Logic Digital Indicator Controller Operating & Environmental:

Temperature & RH

0 to 55ºC (-20 to 80ºC storage), 20% to 95% RH non-condensing

Power Supply

100 to 240V 50/60Hz (optional 20 to 55V AC/22 to 65V DC), approx 4 Watts

Front Panel Protection

IEC IP66 (Behind panel protection is IP20)

Approvals and Certification

CE, UL & ULc


FuzyPro 8010 Brochure

FuzyPro 8010 Manual


Heaters Controls And Sensors Products