Split Core Current Transducers CR4210S
Split Core Current Transducers CR4210S
 The CR4210S Series are Self Powered devices providing a proportional DC voltage output that is powered by the sensed current. These products are ideal for applications where instrument power is not available.
|
|
|
- 35mm DIN Rail or Panel Mount
- Available with analog 4-20 ma or 0-5 Vdc outputs
- 24 Vdc powered
- Use with external current transformers
- Highest precision available
- Connection diagram printed on case
|
- Basic Accuracy: 1.0%
- Calibration: True RMS Sensing, Average RMS, DC
- Thermal Drift: 500 PPM/°C
- Operating Temperature: 0°C to +60°C
- Installation Category: CAT II
- Polution Degree: 2
- Insulation Voltage: 2500 Vdc
- Altitude: 2000 meter max.
- Frequency Range: DC, DC to 4KHZ, 20 Hz - 5 KHz
- MTBF: Greater than 100 K hours
- Cleaning: Water-dampened cloth
- Supply Voltage: 24 Vdc ±10%
- Output Load: 4-20 mA dc - 0 to 300 W, 0-5 Vdc - 2K W or Greater
- Response Time: 250 ms max. 0-90% FS (0.25 ms for CR5410S)
- Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C
|
- Directly connect to PLC
- Sense motor stalls and short circuits
- Industrial instrumentation
- Process control loops
- Phase Fired Controlled Heaters
|
|
|
For Quick Delivery From Stock - CANADA & USA TOLL FREE: 1-800-279-9912
